Video Doorbell Surveillance Control.

800-766-0266

Home of Video Telephone Entry Systems - Building & Home Intercom Systems - Whole House Music Systems - Wired & Wireless

PhoneBell Door Entry Systems

Direct Video Doorbell Surveillance Control

PhoneBell Q-10d & Q-10f Controllers

Both video control and doorbell chime functions are provided by the PhoneBell Door Entry system on the same port. In standard use the homeowner must choose which appliance to put under control of PhoneBell: door chime or TV sets. If the port must control the two distinct appliances at the same time, universal X10 modules must be used.

In video control use rather than doorbell control use, the port will trigger a dry contact closure on door entry calls independently of which doorphone initiated the call and for a total of 4 times. This contact closure will be used to turn on a video screen or a video sub-system upon doorphone calls.

			*More Video Systems*
			For At-Home Attendance
			For Remote Attendance
			For Home Communities
			For Apartment Buildings
			Doorphone Gallery
			Video Doorbells
			Expansion Cards - FAQ's
			Did not find it? See index
			Pick-a-System Tool
			*Be a Dealer*
			*Find a Dealer*
			*Search this Site*
			*Technical Support*
			*Tutorials*
			*Deals!*

Normally, upon a door entry call, the PhoneBell Controller will flash on the video screen current door entry pictures together with ring alerts by home phones until the call is picked up. If the door entry pictures are to be permanently delivered on screen however, video control is not needed and the port need not be used for video control. The flexibility offered by PhoneBell for video surveillance is peerless and conveniently fits any desired mode of operation.

Note that this video-doorbell port may be used for any other home automation control function that you might find it more convenient for.

more >>

Manufacture of peerless Video Telephone Entry Systems - Building & Home Intercom Systems - Multi-Room Music Systems